1.25 x 20 m/1.25 x 60 m;
4.00 kg/7.60 kg;
Amount for usage:
20 sq m/roll and 60 sq m/roll respectively;
Manufactured from real aluminum foil, capable of deflecting heat up to 97%;
For placement underneath the tiles, to protect against heat intrusion.
Length 2 m;
Manufactured from high quality material, special color coated to protect against corrosion;
For installation to facilitate water drainage at the valley rafter, where two roof sections are jointed.
Includes the underlining sheet beneath the standard ridges, stand, C-line bars, and fixing screws for the stand and ridges;
Application: For installation of ridges for covering the ridge line and hip line, in replacement for cement and sand,
and protection against water intrusion.
3 in x 2.00 m;
Manufactured from high quality material, high tolerance to sunlight, rain; can apply top-coated paint;
Application: For covering the top-end of Diamond rain water gutter, to guard against water intrusion near the top-end of the water gutter.
0.28 x 4 m;
For covering the junction of roof ridge line and hip line, or other joints for applying cement underneath the ridges.
High quality acrylic emulsion paint, good tolerance to sunlight and local climate; ready-to-use and does not require mixing; for application over fractured tiles or in areas of scratch markings.
4.00 kg/12.00 kg;
4.40 kg/13.20 kg;
4.00 kg/9.50 kg;
Manufactured from zinc-galvanized metal, corrosion resistant, rigid and durable;
For fixing tiles to battens, to enhance the strength for roof tiles.
For fixing Ultra steel battens to the steel rafters, with thickness of not more than 3.2 mm.
For paint touchup on fractured tiles or for concealing scratch marks.